EW/M-W / WINDOW REVEAL PROFILE WITH MESH

Features:

• The mesh is welded to the plastic profile
• Creates an elastic joint between ETICS and window or door frame
• Protects window and door frames and panes against mechanical damage or soiling in the course of mortar or plaster application
• Prevents cracking at the joint
• Eliminates the need for additional joint filling
• Also usable for colour frames – the bead is all covered with plaster
• Alkali resistant glass fibre mesh
• Fast and clean work around window or door frames

Instruction for use:

First remove the protective foil from the window frame and clean potential impurities or grease. Trim the bead with special mitre cutter to the required length, remove the cover foil from the foam tape and bond to the frame. The bead can be bonded before or after the installation of the thermal insulation in the reveal. Take into account that the adhesive achieves full adhesion only after 24 hours. Air and surface temperatures during application must be between +5°C and +40°C. Connect the beads in the window corners at 45°. After removal of the cover tape, cover the break-off strip with protective film. The film will protect the window or door from damage throughout plastering. Then apply the plaster on the insulating layer and press the mesh of the bead into it. Remove and level the excess plaster outside the mesh with a trowel. When finished final coat application, break off the strip of the bead and remove it including the window protective film. The operating temperature range is -30°C to +70°C

Packaging, storage and transport:

Packed in paper boxes (30 pcs.). Store in a dry roofed place. Transport and store in horizontal position